RADIUS auth server MIB: RADIUS Authentication Server MIB for IPv6

Network Working Group                                          D. Nelson
Request for Comments: 4669                            Enterasys Networks
Obsoletes: 2619                                              August 2006
Category: Standards Track


               RADIUS Authentication Server MIB for IPv6

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a set of extensions that instrument RADIUS
   authentication server functions.  These extensions represent a
   portion of the Management Information Base (MIB) for use with network
   management protocols in the Internet community.  Using these
   extensions, IP-based management stations can manage RADIUS
   authentication servers.

   This memo obsoletes RFC 2619 by deprecating the MIB table containing
   IPv4-only address formats and defining a new table to add support for
   version-neutral IP address formats.  The remaining MIB objects from
   RFC 2619 are carried forward into this document.  This memo also adds
   UNITS and REFERENCE clauses to selected objects.

Table of Contents

   1. Introduction ....................................................3
   2. Terminology .....................................................3
   3. The Internet-Standard Management Framework ......................3
   4. Scope of Changes ................................................3
   5. Structure of the MIB Module .....................................4
   6. Deprecated Objects ..............................................5
   7. Definitions .....................................................5
   8. Security Considerations ........................................21
   9. References .....................................................23
      9.1. Normative References ......................................23
      9.2. Informative References ....................................23
   Appendix A. Acknowledgements ......................................24

1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   The objects defined within this memo relate to the Remote
   Authentication Dial-In User Service (RADIUS) Authentication Server as
   defined in RFC 2865 [RFC2865].

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

   This document uses terminology from RFC 2865 [RFC2865].

   This document uses the word "malformed" with respect to RADIUS
   packets, particularly in the context of counters of "malformed
   packets".  While RFC 2865 does not provide an explicit definition of
   "malformed", malformed generally means that the implementation has
   determined the packet does not match the format defined in RFC 2865.
   Some implementations may determine that packets are malformed when
   the Vendor Specific Attribute (VSA) format does not follow the RFC
   2865 recommendations for VSAs.  Those implementations are used in
   deployments today, and thus set the de facto definition of
   "malformed".

3.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

4.  Scope of Changes

   This document obsoletes RFC 2619 [RFC2619], RADIUS Authentication
   Server MIB, by deprecating the radiusAuthClientTable table and adding
   a new table, radiusAuthClientExtTable, containing
   radiusAuthClientInetAddressType and radiusAuthClientInetAddress.  The
   purpose of these added MIB objects is to support version-neutral IP
   addressing formats.  The existing table containing
   radiusAuthClientAddress is deprecated.  The remaining MIB objects
   from RFC 2619 are carried forward into this document.  This memo also
   adds UNITS and REFERENCE clauses to selected objects.

   RFC 4001 [RFC4001], which defines the SMI Textual Conventions for
   version-neutral IP addresses, contains the following recommendation.

   'In particular, when revising a MIB module that contains IPv4
   specific tables, it is suggested to define new tables using the
   textual conventions defined in this memo [RFC4001] that support all
   versions of IP.  The status of the new tables SHOULD be "current",
   whereas the status of the old IP version specific tables SHOULD be
   changed to "deprecated".  The other approach, of having multiple
   similar tables for different IP versions, is strongly discouraged.'

5.  Structure of the MIB Module

   The RADIUS authentication protocol, described in RFC 2865 [RFC2865],
   distinguishes between the client function and the server function.
   In RADIUS authentication, clients send Access-Requests, and servers
   reply with Access-Accepts, Access-Rejects, and Access-Challenges.
   Typically, NAS devices implement the client function, and thus would
   be expected to implement the RADIUS authentication client MIB, while
   RADIUS authentication servers implement the server function, and thus
   would be expected to implement the RADIUS authentication server MIB.

   However, it is possible for a RADIUS authentication entity to perform
   both client and server functions.  For example, a RADIUS proxy may
   act as a server to one or more RADIUS authentication clients, while
   simultaneously acting as an authentication client to one or more
   authentication servers.  In such situations, it is expected that
   RADIUS entities combining client and server functionality will
   support both the client and server MIBs.  The server MIB is defined
   in this document, and the client MIB is defined in [RFC4668].

   This MIB module contains fourteen scalars as well as a single table,
   the RADIUS Authentication Client Table, which contains one row for
   each RADIUS authentication client with which the server shares a
   secret.  Each entry in the RADIUS Authentication Client Table
   includes thirteen columns presenting a view of the activity of the
   RADIUS authentication server.

   This MIB imports from [RFC2578], [RFC2580], [RFC3411], and [RFC4001].

6.  Deprecated Objects

   The deprecated table in this MIB is carried forward from RFC 2619
   [RFC2619].  There are two conditions under which it MAY be desirable
   for managed entities to continue to support the deprecated table:

   1.  The managed entity only supports IPv4 address formats.

   2.  The managed entity supports both IPv4 and IPv6 address formats,
       and the deprecated table is supported for backwards compatibility
       with older management stations.  This option SHOULD only be used
       when the IP addresses in the new table are in IPv4 format and can
       accurately be represented in both the new table and the
       deprecated table.

   Managed entities SHOULD NOT instantiate row entries in the deprecated
   table, containing IPv4-only address objects, when the RADIUS client
   address represented in such a table row is not an IPv4 address.
   Managed entities SHOULD NOT return inaccurate values of IP address or
   SNMP object access errors for IPv4-only address objects in otherwise
   populated tables.  When row entries exist in both the deprecated
   IPv4-only table and the new IP-version-neutral table that describe
   the same RADIUS client, the row indexes SHOULD be the same for the
   corresponding rows in each table, to facilitate correlation of these
   related rows by management applications.

7.  Definitions

   RADIUS-AUTH-SERVER-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
          Counter32, Integer32,
          IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
          SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
          InetAddressType, InetAddress     FROM INET-ADDRESS-MIB
          MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;

   radiusAuthServMIB MODULE-IDENTITY
          LAST-UPDATED "200608210000Z"  -- 21 August 2006
          ORGANIZATION "IETF RADIUS Extensions Working Group."
          CONTACT-INFO
                 " Bernard Aboba
                   Microsoft
                   One Microsoft Way
                   Redmond, WA  98052
                   US
                   Phone: +1 425 936 6605
                   EMail: bernarda@microsoft.com"
          DESCRIPTION
                "The MIB module for entities implementing the server
                 side of the Remote Authentication Dial-In User
                 Service (RADIUS) authentication protocol.  Copyright
                 (C) The Internet Society (2006).  This version of this
                 MIB module is part of RFC 4669; see the RFC itself for
                 full legal notices."
          REVISION "200608210000Z"  -- 21 August 2006
          DESCRIPTION
                "Revised version as published in RFC 4669.  This
                 version obsoletes that of RFC 2619 by deprecating the
                 MIB table containing IPv4-only address formats and
                 defining a new table to add support for version-neutral
                 IP address formats.  The remaining MIB objects from RFC
                 2619 are carried forward into this version."
          REVISION "199906110000Z"  -- 11 Jun 1999
          DESCRIPTION "Initial version as published in RFC 2619."
          ::= { radiusAuthentication 1 }

   radiusMIB  OBJECT-IDENTITY
          STATUS  current
          DESCRIPTION
                "The OID assigned to RADIUS MIB work by the IANA."
           ::= { mib-2 67 }

   radiusAuthentication  OBJECT IDENTIFIER ::= {radiusMIB 1}

   radiusAuthServMIBObjects OBJECT IDENTIFIER
           ::= { radiusAuthServMIB 1 }

   radiusAuthServ  OBJECT IDENTIFIER
           ::= { radiusAuthServMIBObjects 1 }

   radiusAuthServIdent OBJECT-TYPE
          SYNTAX      SnmpAdminString
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                "The implementation identification string for the
                 RADIUS authentication server software in use on the
                 system, for example, 'FNS-2.1'."
          ::= {radiusAuthServ 1}

   radiusAuthServUpTime OBJECT-TYPE
          SYNTAX      TimeTicks
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                "If the server has a persistent state (e.g., a
                 process), this value will be the time elapsed (in
                 hundredths of a second) since the server process
                 was started.  For software without persistent state,
                 this value will be zero."
          ::= {radiusAuthServ 2}

   radiusAuthServResetTime OBJECT-TYPE
          SYNTAX      TimeTicks
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                "If the server has a persistent state (e.g., a process)
                 and supports a 'reset' operation (e.g., can be told to
                 re-read configuration files), this value will be the
                 time elapsed (in hundredths of a second) since the
                 server was 'reset.'  For software that does not
                 have persistence or does not support a 'reset'
                 operation, this value will be zero."
          ::= {radiusAuthServ 3}

   radiusAuthServConfigReset OBJECT-TYPE
          SYNTAX INTEGER { other(1),
                           reset(2),
                           initializing(3),
                           running(4)}
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
                 "Status/action object to reinitialize any persistent
                  server state.  When set to reset(2), any persistent
                  server state (such as a process) is reinitialized as
                  if the server had just been started.  This value will
                  never be returned by a read operation.  When read,
                  one of the following values will be returned:
                      other(1) - server in some unknown state;
                      initializing(3) - server (re)initializing;
                      running(4) - server currently running."
          ::= {radiusAuthServ 4}

   radiusAuthServTotalAccessRequests OBJECT-TYPE
           SYNTAX Counter32
           UNITS "packets"
           MAX-ACCESS read-only
           STATUS current
           DESCRIPTION
                  "The number of packets received on the
                   authentication port."
           REFERENCE "RFC 2865 section 4.1"
           ::= { radiusAuthServ 5}

   radiusAuthServTotalInvalidRequests OBJECT-TYPE
           SYNTAX Counter32
           UNITS "packets"
           MAX-ACCESS read-only
           STATUS current
           DESCRIPTION
                 "The number of RADIUS Access-Request packets
                  received from unknown addresses."
           REFERENCE "RFC 2865 section 4.1"
           ::= { radiusAuthServ 6 }

   radiusAuthServTotalDupAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of duplicate RADIUS Access-Request
                 packets received."
          REFERENCE "RFC 2865 section 4.1"
          ::= { radiusAuthServ 7 }

   radiusAuthServTotalAccessAccepts OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of RADIUS Access-Accept packets sent."
          REFERENCE "RFC 2865 section 4.2"
          ::= { radiusAuthServ 8 }

   radiusAuthServTotalAccessRejects OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Reject packets sent."
         REFERENCE "RFC 2865 section 4.3"
         ::= { radiusAuthServ 9 }

   radiusAuthServTotalAccessChallenges OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Challenge packets sent."
         REFERENCE "RFC 2865 section 4.4"
         ::= { radiusAuthServ 10 }

   radiusAuthServTotalMalformedAccessRequests OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of malformed RADIUS Access-Request
                packets received.  Bad authenticators
                and unknown types are not included as
                malformed Access-Requests."
         REFERENCE "RFC 2865 section 4.1"
         ::= { radiusAuthServ 11 }

   radiusAuthServTotalBadAuthenticators OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Authentication-Request packets
                that contained invalid Message Authenticator
                attributes received."
         REFERENCE "RFC 2865 section 3"
         ::= { radiusAuthServ 12 }

   radiusAuthServTotalPacketsDropped OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of incoming packets
                silently discarded for some reason other
                than malformed, bad authenticators or
                unknown types."
         REFERENCE "RFC 2865 section 3"
         ::= { radiusAuthServ 13 }

   radiusAuthServTotalUnknownTypes OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS packets of unknown type that
                were received."
         REFERENCE "RFC 2865 section 4"
         ::= { radiusAuthServ 14 }


   radiusAuthClientTable OBJECT-TYPE
          SYNTAX     SEQUENCE OF RadiusAuthClientEntry
          MAX-ACCESS not-accessible
          STATUS     deprecated
          DESCRIPTION
                "The (conceptual) table listing the RADIUS
                 authentication clients with which the server shares
                 a secret."
          ::= { radiusAuthServ 15 }


   radiusAuthClientEntry OBJECT-TYPE
          SYNTAX     RadiusAuthClientEntry
          MAX-ACCESS not-accessible
          STATUS     deprecated
          DESCRIPTION
                "An entry (conceptual row) representing a RADIUS
                 authentication client with which the server shares a
                 secret."
          INDEX      { radiusAuthClientIndex }
          ::= { radiusAuthClientTable 1 }

   RadiusAuthClientEntry ::= SEQUENCE {
          radiusAuthClientIndex                           Integer32,
          radiusAuthClientAddress                         IpAddress,
          radiusAuthClientID                        SnmpAdminString,
          radiusAuthServAccessRequests                    Counter32,
          radiusAuthServDupAccessRequests                 Counter32,
          radiusAuthServAccessAccepts                     Counter32,
          radiusAuthServAccessRejects                     Counter32,
          radiusAuthServAccessChallenges                  Counter32,
          radiusAuthServMalformedAccessRequests           Counter32,
          radiusAuthServBadAuthenticators                 Counter32,
          radiusAuthServPacketsDropped                    Counter32,
          radiusAuthServUnknownTypes                      Counter32
   }

   radiusAuthClientIndex OBJECT-TYPE

          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     deprecated
          DESCRIPTION
                "A number uniquely identifying each RADIUS
                 authentication client with which this server
                 communicates."
          ::= { radiusAuthClientEntry 1 }

   radiusAuthClientAddress OBJECT-TYPE
          SYNTAX     IpAddress
          MAX-ACCESS read-only
          STATUS     deprecated
          DESCRIPTION
                "The NAS-IP-Address of the RADIUS authentication client
                 referred to in this table entry."
          REFERENCE "RFC 2865 section 2"
          ::= { radiusAuthClientEntry 2 }

   radiusAuthClientID OBJECT-TYPE
          SYNTAX     SnmpAdminString
          MAX-ACCESS read-only
          STATUS     deprecated
          DESCRIPTION
                "The NAS-Identifier of the RADIUS authentication client
                 referred to in this table entry.  This is not
                 necessarily the same as sysName in MIB II."
          REFERENCE "RFC 2865 section 5.32"
          ::= { radiusAuthClientEntry 3 }

   -- Server Counters

   --
   -- Responses = AccessAccepts + AccessRejects + AccessChallenges
   --
   -- Requests - DupRequests - BadAuthenticators - MalformedRequests -
   -- UnknownTypes -  PacketsDropped - Responses = Pending
   --
   -- Requests - DupRequests - BadAuthenticators - MalformedRequests -
   -- UnknownTypes - PacketsDropped = entries logged

   radiusAuthServAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of packets received on the authentication
                 port from this client."
          REFERENCE "RFC 2865 section 4.1"
          ::= { radiusAuthClientEntry  4 }

   radiusAuthServDupAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of duplicate RADIUS Access-Request
                 packets received from this client."
          REFERENCE "RFC 2865 section 4.1"
          ::= { radiusAuthClientEntry  5 }

   radiusAuthServAccessAccepts OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of RADIUS Access-Accept packets
                 sent to this client."
          REFERENCE "RFC 2865 section 4.2"
          ::= { radiusAuthClientEntry  6 }

   radiusAuthServAccessRejects OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
                "The number of RADIUS Access-Reject packets
                 sent to this client."
          REFERENCE "RFC 2865 section 4.3"
          ::= { radiusAuthClientEntry  7 }

   radiusAuthServAccessChallenges OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of RADIUS Access-Challenge packets
                 sent to this client."
          REFERENCE "RFC 2865 section 4.4"
          ::= { radiusAuthClientEntry  8 }

   radiusAuthServMalformedAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of malformed RADIUS Access-Request
                 packets received from this client.
                 Bad authenticators and unknown types are not included
                 as malformed Access-Requests."
          REFERENCE "RFC 2865 section 3"
          ::= { radiusAuthClientEntry  9 }

   radiusAuthServBadAuthenticators OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of RADIUS Authentication-Request packets
                 that contained invalid Message Authenticator
                 attributes received from this client."
          REFERENCE "RFC 2865 section 3"
          ::= { radiusAuthClientEntry  10 }

   radiusAuthServPacketsDropped OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
                 "The number of incoming packets from this
                  client silently discarded for some reason other
                  than malformed, bad authenticators or
                  unknown types."
          REFERENCE "RFC 2865 section 3"
          ::= { radiusAuthClientEntry  11 }

   radiusAuthServUnknownTypes OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS deprecated
          DESCRIPTION
                "The number of RADIUS packets of unknown type that
                 were received from this client."
          REFERENCE "RFC 2865 section 4"
          ::= { radiusAuthClientEntry  12 }

   -- New MIB objects added in this revision

   radiusAuthClientExtTable OBJECT-TYPE
          SYNTAX     SEQUENCE OF RadiusAuthClientExtEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "The (conceptual) table listing the RADIUS
                 authentication clients with which the server shares
                 a secret."
          ::= { radiusAuthServ 16 }

   radiusAuthClientExtEntry OBJECT-TYPE
          SYNTAX     RadiusAuthClientExtEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing a RADIUS
                 authentication client with which the server shares a
                 secret."
          INDEX      { radiusAuthClientExtIndex }
          ::= { radiusAuthClientExtTable 1 }

   RadiusAuthClientExtEntry ::= SEQUENCE {
          radiusAuthClientExtIndex                 Integer32,
          radiusAuthClientInetAddressType          InetAddressType,
          radiusAuthClientInetAddress              InetAddress,
          radiusAuthClientExtID                    SnmpAdminString,
          radiusAuthServExtAccessRequests          Counter32,
          radiusAuthServExtDupAccessRequests       Counter32,
          radiusAuthServExtAccessAccepts           Counter32,
          radiusAuthServExtAccessRejects           Counter32,
          radiusAuthServExtAccessChallenges        Counter32,
          radiusAuthServExtMalformedAccessRequests Counter32,
          radiusAuthServExtBadAuthenticators       Counter32,
          radiusAuthServExtPacketsDropped          Counter32,
          radiusAuthServExtUnknownTypes            Counter32,
          radiusAuthServCounterDiscontinuity       TimeTicks
   }

   radiusAuthClientExtIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS
                 authentication client with which this server
                 communicates."

          ::= { radiusAuthClientExtEntry 1 }

   radiusAuthClientInetAddressType OBJECT-TYPE
            SYNTAX     InetAddressType
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                  "The type of address format used for the
                   radiusAuthClientInetAddress object."
            ::= { radiusAuthClientExtEntry 2 }

      radiusAuthClientInetAddress OBJECT-TYPE
            SYNTAX     InetAddress
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                  "The IP address of the RADIUS authentication
                   client referred to in this table entry, using
                   the version-neutral IP address format."
            ::= { radiusAuthClientExtEntry 3 }


   radiusAuthClientExtID OBJECT-TYPE
          SYNTAX     SnmpAdminString
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The NAS-Identifier of the RADIUS authentication client
                 referred to in this table entry.  This is not
                 necessarily the same as sysName in MIB II."
          REFERENCE "RFC 2865 section 5.32"
          ::= { radiusAuthClientExtEntry 4 }

   -- Server Counters

   --
   -- Responses = AccessAccepts + AccessRejects + AccessChallenges
   --
   -- Requests - DupRequests - BadAuthenticators - MalformedRequests -
   -- UnknownTypes -  PacketsDropped - Responses = Pending
   --
   -- Requests - DupRequests - BadAuthenticators - MalformedRequests -
   -- UnknownTypes - PacketsDropped = entries logged

   radiusAuthServExtAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of packets received on the authentication
                 port from this client.  This counter may experience a
                 discontinuity when the RADIUS Server module within the
                 managed entity is reinitialized, as indicated by the
                 current value of radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4.1"
          ::= { radiusAuthClientExtEntry  5 }

   radiusAuthServExtDupAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of duplicate RADIUS Access-Request
                 packets received from this client.  This counter may
                 experience a discontinuity when the RADIUS Server
                 module within the managed entity is reinitialized, as
                 indicated by the current value of
                 radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4.1"
          ::= { radiusAuthClientExtEntry  6 }

   radiusAuthServExtAccessAccepts OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of RADIUS Access-Accept packets
                 sent to this client.  This counter may experience a
                 discontinuity when the RADIUS Server module within the
                 managed entity is reinitialized, as indicated by the
                 current value of radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4.2"
          ::= { radiusAuthClientExtEntry  7 }

   radiusAuthServExtAccessRejects OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The number of RADIUS Access-Reject packets
                 sent to this client.  This counter may experience a
                 discontinuity when the RADIUS Server module within the
                 managed entity is reinitialized, as indicated by the
                 current value of radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4.3"
          ::= { radiusAuthClientExtEntry  8 }

   radiusAuthServExtAccessChallenges OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of RADIUS Access-Challenge packets
                 sent to this client.  This counter may experience a
                 discontinuity when the RADIUS Server module within the
                 managed entity is reinitialized, as indicated by the
                 current value of radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4.4"
          ::= { radiusAuthClientExtEntry  9 }

   radiusAuthServExtMalformedAccessRequests OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of malformed RADIUS Access-Request
                 packets received from this client.  Bad authenticators
                 and unknown types are not included as malformed
                 Access-Requests.  This counter may experience a
                 discontinuity when the RADIUS Server module within the
                 managed entity is reinitialized, as indicated by the
                 current value of radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 sections 3, 4.1"
          ::= { radiusAuthClientExtEntry  10 }

   radiusAuthServExtBadAuthenticators OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of RADIUS Authentication-Request packets
                 that contained invalid Message Authenticator
                 attributes received from this client.  This counter
                 may experience a discontinuity when the RADIUS Server
                 module within the managed entity is reinitialized, as
                 indicated by the current value of
                 radiusAuthServCounterDiscontinuity."

          REFERENCE "RFC 2865 section 3"
          ::= { radiusAuthClientExtEntry  11 }

   radiusAuthServExtPacketsDropped OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The number of incoming packets from this client
                 silently discarded for some reason other than
                 malformed, bad authenticators or unknown types.
                 This counter may experience a discontinuity when the
                 RADIUS Server module within the managed entity is
                 reinitialized, as indicated by the current value of
                 radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 3"
          ::= { radiusAuthClientExtEntry  12 }

   radiusAuthServExtUnknownTypes OBJECT-TYPE
          SYNTAX Counter32
          UNITS "packets"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of RADIUS packets of unknown type that
                 were received from this client.  This counter may
                 experience a discontinuity when the RADIUS Server
                 module within the managed entity is reinitialized, as
                 indicated by the current value of
                 radiusAuthServCounterDiscontinuity."
          REFERENCE "RFC 2865 section 4"
          ::= { radiusAuthClientExtEntry  13 }

   radiusAuthServCounterDiscontinuity OBJECT-TYPE
            SYNTAX TimeTicks
            UNITS "centiseconds"
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                  "The number of centiseconds since the last
                   discontinuity in the RADIUS Server counters.
                   A discontinuity may be the result of a
                   reinitialization of the RADIUS Server module
                   within the managed entity."
            ::= { radiusAuthClientExtEntry 14 }

   -- conformance information

   radiusAuthServMIBConformance  OBJECT IDENTIFIER
          ::= { radiusAuthServMIB 2 }

   radiusAuthServMIBCompliances  OBJECT IDENTIFIER
          ::= { radiusAuthServMIBConformance 1 }

   radiusAuthServMIBGroups  OBJECT IDENTIFIER
          ::= { radiusAuthServMIBConformance 2 }

   -- compliance statements

   radiusAuthServMIBCompliance MODULE-COMPLIANCE
               STATUS  deprecated
               DESCRIPTION
                     "The compliance statement for authentication
                      servers implementing the RADIUS Authentication
                      Server MIB.  Implementation of this module is for
                      IPv4-only entities, or for backwards compatibility
                      use with entities that support both IPv4 and
                      IPv6."
               MODULE  -- this module
               MANDATORY-GROUPS { radiusAuthServMIBGroup }

               OBJECT        radiusAuthServConfigReset
               WRITE-SYNTAX  INTEGER { reset(2) }
               DESCRIPTION  "The only SETable value is 'reset' (2)."

               ::= { radiusAuthServMIBCompliances 1 }


   radiusAuthServMIBExtCompliance MODULE-COMPLIANCE
               STATUS  current
               DESCRIPTION
                     "The compliance statement for authentication
                      servers implementing the RADIUS Authentication
                      Server IPv6 Extensions MIB.  Implementation of
                      this module is for entities that support IPv6,
                      or support IPv4 and IPv6."
               MODULE  -- this module
               MANDATORY-GROUPS { radiusAuthServExtMIBGroup }

               OBJECT        radiusAuthServConfigReset
               WRITE-SYNTAX  INTEGER { reset(2) }
               DESCRIPTION  "The only SETable value is 'reset' (2)."

               OBJECT radiusAuthClientInetAddressType
               SYNTAX InetAddressType { ipv4(1), ipv6(2) }
               DESCRIPTION
                 "An implementation is only required to support
                  IPv4 and globally unique IPv6 addresses."

               OBJECT radiusAuthClientInetAddress
               SYNTAX InetAddress ( SIZE (4|16) )
               DESCRIPTION
                 "An implementation is only required to support
                  IPv4 and globally unique IPv6 addresses."

               ::= { radiusAuthServMIBCompliances 2 }


   -- units of conformance

   radiusAuthServMIBGroup OBJECT-GROUP
         OBJECTS {radiusAuthServIdent,
                  radiusAuthServUpTime,
                  radiusAuthServResetTime,
                  radiusAuthServConfigReset,
                  radiusAuthServTotalAccessRequests,
                  radiusAuthServTotalInvalidRequests,
                  radiusAuthServTotalDupAccessRequests,
                  radiusAuthServTotalAccessAccepts,
                  radiusAuthServTotalAccessRejects,
                  radiusAuthServTotalAccessChallenges,
                  radiusAuthServTotalMalformedAccessRequests,
                  radiusAuthServTotalBadAuthenticators,
                  radiusAuthServTotalPacketsDropped,
                  radiusAuthServTotalUnknownTypes,
                  radiusAuthClientAddress,
                  radiusAuthClientID,
                  radiusAuthServAccessRequests,
                  radiusAuthServDupAccessRequests,
                  radiusAuthServAccessAccepts,
                  radiusAuthServAccessRejects,
                  radiusAuthServAccessChallenges,
                  radiusAuthServMalformedAccessRequests,
                  radiusAuthServBadAuthenticators,
                  radiusAuthServPacketsDropped,
                  radiusAuthServUnknownTypes
                 }
         STATUS  deprecated
         DESCRIPTION
               "The collection of objects providing management of
                a RADIUS Authentication Server."
         ::= { radiusAuthServMIBGroups 1 }

   radiusAuthServExtMIBGroup OBJECT-GROUP
         OBJECTS {radiusAuthServIdent,
                  radiusAuthServUpTime,
                  radiusAuthServResetTime,
                  radiusAuthServConfigReset,
                  radiusAuthServTotalAccessRequests,
                  radiusAuthServTotalInvalidRequests,
                  radiusAuthServTotalDupAccessRequests,
                  radiusAuthServTotalAccessAccepts,
                  radiusAuthServTotalAccessRejects,
                  radiusAuthServTotalAccessChallenges,
                  radiusAuthServTotalMalformedAccessRequests,
                  radiusAuthServTotalBadAuthenticators,
                  radiusAuthServTotalPacketsDropped,
                  radiusAuthServTotalUnknownTypes,
                  radiusAuthClientInetAddressType,
                  radiusAuthClientInetAddress,
                  radiusAuthClientExtID,
                  radiusAuthServExtAccessRequests,
                  radiusAuthServExtDupAccessRequests,
                  radiusAuthServExtAccessAccepts,
                  radiusAuthServExtAccessRejects,
                  radiusAuthServExtAccessChallenges,
                  radiusAuthServExtMalformedAccessRequests,
                  radiusAuthServExtBadAuthenticators,
                  radiusAuthServExtPacketsDropped,
                  radiusAuthServExtUnknownTypes,
                  radiusAuthServCounterDiscontinuity
                 }
         STATUS  current
         DESCRIPTION
               "The collection of objects providing management of
                a RADIUS Authentication Server."
         ::= { radiusAuthServMIBGroups 2 }

   END

8.  Security Considerations

   There are a number of management objects defined in this MIB that
   have a MAX-ACCESS clause of read-write and/or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are:

   radiusAuthServConfigReset
      This object can be used to reinitialize the persistent state of
      any server.  When set to reset(2), any persistent server state
      (such as a process) is reinitialized as if the server had just
      been started.  Depending on the server implementation details,
      this action may or may not interrupt the processing of pending
      request in the server.  Abuse of this object may lead to a Denial
      of Service attack on the server.

   There are a number of managed objects in this MIB that may contain
   sensitive information.  These are:

   radiusAuthClientIPAddress
      This can be used to determine the address of the RADIUS
      authentication client with which the server is communicating.
      This information could be useful in mounting an attack on the
      authentication client.

   radiusAuthClientInetAddress
      This can be used to determine the address of the RADIUS
      authentication client with which the server is communicating.
      This information could be useful in mounting an attack on the
      authentication client.

   It is thus important to control even GET access to these objects and
   possibly to even encrypt the values of these object when sending them
   over the network via SNMP.  Not all versions of SNMP provide features
   for such a secure environment.

   SNMP versions prior to SNMPv3 do not provide a secure environment.
   Even if the network itself is secure (for example by using IPsec),
   there is no control as to who on the secure network is allowed to
   access and GET/SET (read/change/create/delete) the objects in this
   MIB.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Ed., Perkins, D., Ed., and J.
              Schoenwaelder, Ed., "Structure of Management Information
              Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]  McCloghrie, K., Ed., Perkins, D., Ed., and J.
              Schoenwaelder, Ed., "Textual Conventions for SMIv2",
              STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC4001]  Daniele, M., Haberman, B., Routhier, S., and J.
              Schoenwaelder, "Textual Conventions for Internet Network
              Addresses", RFC 4001, February 2005.

9.2.  Informative References

   [RFC2619]  Zorn, G. and B. Aboba, "RADIUS Authentication Server MIB",
              RFC 2619, June 1999.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.

   [RFC4668]  Nelson, D., "RADIUS Authentication Client MIB for IPv6",
              RFC 4668, August 2006.

Appendix A.  Acknowledgements

   The authors of the original MIB are Bernard Aboba and Glen Zorn.

   Many thanks to all reviewers, especially to David Harrington, Dan
   Romascanu, C.M. Heard, Bruno Pape, Greg Weber, and Bert Wijnen.

Author's Address

   David B. Nelson
   Enterasys Networks
   50 Minuteman Road
   Andover, MA  01810
   USA

   EMail: dnelson@enterasys.com

Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).